Technical Specifications for SEELab3

Downloads for SEELab-3.0
The software for SEELab3 is shared with its predecessor ExpEYES17. The interface dynamically adapts to the connected device.
Return to the main Product Page for SEELab3
Voltage inputs (Also Single ended Oscilloscope inputs @1MSPS total)
PIN Name Input Range(s) Input Impedance Resolution
A1 +/-16V... +/-250mV 1 MΩ 12-bit
A2 +/-16V... +/-250mV 1 MΩ 12-bit
A3 +/-3.3V 10 MΩ 12-bit
SEN 0-3.3V Internal 5.1K Pull-up to 3.3V 12-bit
IN1 0-3.3V Direct ADC in 12-bit
PCS 0-3.3V Linked to PCS 12-bit
4 channels(A1,A2,A3,MIC) can be simultaneously sampled. Max buffer size of 10K points @10-bit.
12-bit sampling available for individual traces.
Waveform Generators
PIN Name Frequency Range Shape Amplitude
WG 5Hz to 5KHz Sine/Triangle/Arbit +/- 3.3V. Attenuable via
software and hardware
WG bar 5Hz to 5KHz. Linked to WG.
180 degree phase shifted
Sine/Triangle/Arbit +/- 3.3V. Attenuable
SQ1 0.01Hz to 8MHz Square 0-5V Fixed
SQ2 (* conflicts WG) 0.01 to 8MHz Square 0-5V Fixed
CS3(Clock output map) 1MHz-64MHz(Selectable) Square 0-3.3
Voltage Sources
PIN Name Range Current Limit Resolution
PV1 -5V to +5V 20mA 12-bit
PV2 -3.3V to +3.3V 20mA 12-bit
5V USB supply(~5V) 400mA Always ON
OD1 5V USB 100mA ON/OFF
+6V +6V 30mA Always ON
-6V -6V 30mA Always ON
Current Sources
PIN Name Range Voltage Limit Resolution
PCS 0-3mA 3.3V 12-bit
Other Measurement Inputs
Parameter Input Pin Range Remarks
Capacitance IN1 10pF to 100uF Connect between IN1 and GND
Resistance SEN 100 Ω to 100K Ω Connect between SEN and GND
Timing IN2 500nS to 60 Seconds 32-bit timer. Frequency/Duty Cycle/Multiple edges
Diode Forward Voltage SEN Up to 3V. 0.1 mA < I < 1 mA Connect from SEN to GND
Communication interfaces for Add-ons
Interface PINS Remarks
I2C SCL, SDA Check sensors section below
SPI SCK,SDI,SDO,CS1-CS3 AD9833 wavegen
HX711 ADC OD1( HX_SCK), IN2(HX_DT) Custom protocol

Sensors (I2C/SPI)

  • BME280: Temp, Pressure, Humidity
  • AD8232: ECG Amplifier module
  • TSL2561: Luminosity Sensor
  • HMC5883: 3 Axis Magnetometer
  • MPU6050: 6 DOF IMU: Accel+Gyro
  • MLX90614: Passive IR Temperature
  • AHT10: Humidity Measurement
  • ML8511: Analog UV sensor
  • MAX30100: Heart rate and Oximetry
  • AD9833: 24 bit DDS sine wave generator
  • PCA9685: 16 Channel PWM
  • HX711: 24 bit ADC for load cells
  • MCP5725: 12 bit DAC
  • QMC5883: Magnetometer
  • BH1750: Luminosity Sensor
  • AD8232: ECG Instrumentation Amp
  • ADS1115: 16 bit ADC
  • TCS34725: RGB Color Sensor
  • ADXL345: 3 Axis Accelerometer
  • INA219: Current Meter